XH-W3001 Temperature Controller - Multi-Voltage Thermostat for Cooling and Heating

The XH-W3001 Temperature Controller is a versatile solution for precise temperature management in both cooling and heating applications. This digital thermostat features a microcomputer design with multiple parameter settings and memory functions, ensuring accurate temperature control for a wide range of uses.

This controller supports various power options, including DC12V, DC24V, and AC220V, allowing it to adapt to different voltage requirements seamlessly. The user-friendly interface includes three buttons (Set, Increase, Decrease) that enable quick adjustments of settings for heating or cooling. A 3-digit LED display offers clear temperature readings, making it simple for users to view and modify their configurations.

Installation is made easy with the thermostat’s dual-ear mounting holes, which provide stability and convenience while securing the device in place during operation. With a design focused on reliability and ease of use, the XH-W3001 ensures precise temperature regulation without unnecessary complexity.

**Instructions for Use:**

- **Setting the Start Temperature:** Press the UP button to display the start temperature. Press and hold the UP button for approximately three seconds until the start temperature number begins to flash, then use the UP and DOWN buttons to adjust to the desired value.

- **Setting the Shutdown Temperature:** Press the DOWN button to display the shutdown temperature. Hold the DOWN button for about three seconds to make the shutdown temperature number flash. Adjust the desired value using the UP and DOWN buttons.

- **Factory Reset Procedure:** With the device powered on, press and hold both the UP and DOWN buttons simultaneously. The display will show '888', and the system will automatically switch to detection temperature, indicating a successful factory reset.

**Heating Mode Settings:**

To set the controller for heating mode, ensure the start temperature is lower than the stop temperature.

1. Long press the UP/DOWN button to make the start temperature flash, then set it using the UP/DOWN buttons.

2. Long press the DOWN button to stop the temperature from flashing and then set the stop temperature.

*Example Use Case:* To control a water heater, set the stop heating temperature to 65°C and restart heating when the temperature drops to 50°C.

**Cooling Mode Settings:**

For refrigeration mode, set the start temperature higher than the stop temperature.

1. Long press the UP/DOWN button to make the cooling mode setting flash and set the start temperature with the UP/DOWN buttons.

2. Long press the DOWN button to stop flashing and set the stop temperature.

*Example Use Case:* For animal breeding, set the stop ventilation temperature to 26°C, and restart refrigeration when the temperature reaches 28°C.

**Reminders:**

When configuring the heating mode, ensure the set temperature values are in the correct order; otherwise, the output indicator light will remain off, and the function will not operate. If this occurs, verify the temperature settings.

**Specifications:**

- **Power Supply Voltage:** 12V/24V/110-220V

- **Temperature Control Range:** -50°C to 110°C

- **Temperature Measurement Range:** -50°C to 110°C

- **Temperature Control Accuracy:** 0.1°C

- **Load Power:** Up to 1500W

- **Measurement Input:** NTG10K waterproof probe (1 meter length)

- **Output Type:** Direct output, with a maximum output capacity of 10A

- **Installation Hole Spacing:** 73mm (4mm aperture)

- **External Dimensions:** 60 x 45 x 31mm (2.36 x 1.77 x 1.22 inches)

- **Weight:** 47g

**Included in Package:**

1 x XH-W3001 Temperature Controller

**Notes:**

1. Manual measurements may vary by 1-3mm. Thank you for your understanding.

2. Due to variations in monitor displays, the actual product color may differ from the images shown.

Find the right tool for any project – explore more from Wood Tools.